Hanna-instruments HI 83203 Manual de usuario descargar pdf (Pagina 32)

Nitrite HR

NITRITE HIGH RANGE

SPECIFICATIONS

Range 0 to 150 mg/L

Resolution 1 mg/L

Accuracy ±4 mg/L ±4% of reading at 25 °C

Typical EMC ±1 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 575 nm

Method Adaptation of the Ferrous Sulfate method. The reaction between nitrite and the

reagent causes a greenish-brown tint in the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93708-0 Powder reagent 1 packet

REAGENT SETS

HI 93708-01 Reagents for 100 tests

HI 93708-03 Reagents for 300 tests

For other accessories see page 46.

MEASUREMENT PROCEDURE

• Select the

Nitrite HR

method using the procedure described

in the

Method Selection

section (see page 12).

• Fill the cuvette up to the mark with 10 mL of unreacted

sample and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the Zero key. The display will show “-0.0-” when the meter is zeroed and ready for

measurement.

• Remove the cuvette.

10 mL

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Hanna-instruments HI 83203 Manual de usuario Pagina 32