Hanna-instruments HI 83749 Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
19
Replace the cap. Invert several times to mix and
then wait for 1 minute.
Insert the cuvet into the instrument and close
the lid.
Press READ
and “----” will blink on the
display. After a few seconds the instrument
displays the first reading. The meter continues
updating the readings until the “Lamp and Read
Status” indicator turns off.
The final displayed value is the averaged reading
of turbidity in NTU.
This is T2. Record the value.
If “T2<T1+2” the wine can be considered
stable. Otherwise the wine needs to be
stabilized.
Note: to get more representative results of long
term protein stability, HANNA Instruments
®
recommends to filter the wine sample first
through a 0.45 micron filterdisc before analysis.
e.g.
T2
22
Place the cuvet #1 into the instrument and
close the lid.
Press READ and “----” will blink on the
display. After a few seconds the instrument
displays the first reading. The meter continues
updating the readings until the “Lamp and Read
Status” indicator turns off.
The final displayed value is the averaged
reading.
This is T1 for sample #1. Record the value.
Remove cuvet #1 from the instrument and
open the cap.
Use the 1000 µL automatic pipette to add
exactly 1 mL of HI 83749-0 Bentocheck
reagent to the cuvet. For a correct use of the
automatic pipette please follow the related
Instruction Sheet.
Replace the cap. Invert several times to mix and
then wait for 1 minute.
Insert the cuvet into the instrument and close
the lid.
Press READ
and “----” will blink on the
display. After a few seconds the instrument
displays the first reading. The meter continues
updating the readings until the “Lamp and Read
Status” indicator turns off.
e.g. Sample #1
T1
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios