Hanna-instruments HI 83205-2008 Manual de usuario descargar pdf (Pagina 10)

18 19

Ammonia MR

SPECIFICATIONS

Range 0.00 to 10.00 mg/L

Resolution 0.01 mg/L

Accuracy ±0.05 mg/L ±5% of reading

Typical EMC ±0.01 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 420 nm

Method Adaptation of the

ASTM Manual of Water and Environmental Technology, D1426-92

Nessler method. The reaction between ammonia and reagents causes a yellow tint in

the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93715A-0 First Reagent 4 drops (6 drops for seawater)

HI 93715B-0 Second Reagent 4 drops (10 drops for seawater)

REAGENT SETS

HI 93715-01 Reagents for 100 tests

HI 93715-03 Reagents for 300 tests

For other accessories see page 73.

MEASUREMENT PROCEDURE

• Select the

Ammonia MR

method using the procedure described in

the

Method Selection

section (see page 12).

• Fill the cuvette with 10 mL of unreacted sample (up to the mark)

and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press ZERO key. The display will show “-0.0-” when the meter is

zeroed and ready for measurement.

AMMONIA MEDIUM RANGE

Aluminum

• Add the content of one packet of HI 93712C-0 Bleaching

Powder to one of the two cuvettes. Replace the cap and

shake vigorously until completely dissolved. This is the blank.

• Place the blank into the holder and close the lid.

• Press TIMER and the display will show the countdown prior to

zeroing the blank. Alternatively wait for 15 minutes and then press

ZERO. The display will show "-0.0-" when the meter is zeroed and

ready for measurement.

• Remove the blank and insert the other cuvette into the instrument.

• Press the READ key and the meter will perform the reading. The

instrument displays the results in mg/L of aluminum.

• Press the  or  to access the second level of functions.

• Press the Chem Frm functional key to convert the result in mg/L of Al

• Press the  or  to go back to the measurement screen.

INTERFERENCES

Interference may be caused by:

Iron above 20 mg/L Alkalinity above 1000 mg/L

Phosphate above 50 mg/L Fluoride must be absent

# 1

# 2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 38 39

Comentarios a estos manuales

Sin comentarios

Hanna-instruments HI 83205-2008 Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Hanna-instruments HI 83205-2008