Hanna-instruments HI 96710 Manual de usuario descargar pdf (Pagina 16)

• Press READ/ /TIMER. The lamp, cuvette

and detector icons will appear on the

display, depending on the measurement

phase.

• The instrument directly displays the pH

measured value on the Liquid Crystal

Display.

FREE CHLORINE MEASUREMENT

• Fill the cuvette up to the mark with 10

mL of unreacted sample and replace the

cap.

• Place the cuvette into the holder and en-

sure that the notch on the cap is

positioned securely into the groove.

• Press ZERO/CFM and the lamp, cuvette

and detector icons will appear on the

display, depending on the measurement

phase.

• After a few seconds, the display will

show “-0.0-”. The meter is now zeroed

and ready for measurement.

• Remove the cuvette.

• Add the content of one packet of

HI 93701-0 reagent. Replace the cap

and shake gently for 20 seconds (or

2 minutes in case of seawater analysis).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sin comentarios

Hanna-instruments HI 96710 Manual de usuario Pagina 16