Hanna-instruments HI 83208-2008 Manual de usuario descargar pdf (Pagina 26)

50 51

Nitrate

SPECIFICATIONS

Range 0.0 to 30.0 mg/L

Resolution 0.1 mg/L

Accuracy ±0.5 mg/L ±10% of reading

Typical EMC ±0.1 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 525 nm

Method Adaptation of the cadmium reduction method. The reaction between nitrate and the

reagent causes an amber tint in the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93728-0 Powder reagent 1 packet

REAGENT SETS

HI 93728-01 Reagents for 100 tests

HI 93728-03 Reagents for 300 tests

For other accessories see page 73.

MEASUREMENT PROCEDURE

• Select the

Nitrate

method using the procedure described in

the

Method Selection

section (see page 12).

• Using the pipette, fill the cuvette with 6 ml of sample, up

to half of its height, and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press ZERO key. The display will show “-0.0-” when the

meter is zeroed and ready for measurement.

• Remove the cuvette and add the content of one packet of

HI 93728-0 reagent.

6 mL

NITRATE

INTERFERENCES

Interference may be caused by:

must not be present

above 32 mg/L

above 1000 mg/L (as CaCO

)

above 20 mg/L

–

above 8000 mg/L

above 20 mg/L

above 40 mg/L

above 15 mg/L

–

above 20 mg/L

above 10 mg/L

above 500 mg/L

above 400 mg/L

above 25 mg/L

above 60 mg/L

above 5000 mg/L

above 20 mg/L

above 30 mg/L

Nickel LR

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Comentarios a estos manuales

Sin comentarios

Hanna-instruments HI 83208-2008 Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Hanna-instruments HI 83208-2008