Hanna-instruments HI 83211 Manual de usuario descargar pdf (Pagina 33)

SPECIFICATIONS

Range 0.0 to 12.5 mg/L

Resolution 0.1 mg/L

Accuracy ±0.1 mg/L ±5% of reading at 25 °C

Typical EMC ±0.1 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 525 nm

Method Adaptation of the

Standard Methods for the Examination of Water and Wastewater,

edition

, DPD method. The reaction between iodine and the reagent causes a pink

tint in the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93718-0 DPD Reagent 1 packet

REAGENT SETS

HI 93718-01 Reagents for 100 tests

HI 93718-03 Reagents for 300 tests

For other accessories see page 66.

MEASUREMENT PROCEDURE

• Select the

Iodine

method using the procedure described in

the

Method Selection

section (see page 12).

• Fill the cuvette with 10 mL of unreacted sample (up to

the mark) and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the Zero key. The display will show “-0.0-” when the meter is zeroed and ready for

measurement.

• Remove the cap and add the content of one packet of

HI 93718-0 DPD reagent. Replace the cap and shake

gently for about 30 seconds to dissolve most of the reagent.

10 mL

Iodine

IODINE

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

Sin comentarios

Hanna-instruments HI 83211 Manual de usuario Pagina 33