Hanna-instruments HI 96702 Manual de usuario descargar pdf (Pagina 5)

SPECIFICATIONS

PRECISION AND ACCURACY

Range 0.00 to 5.00 mg/L

Resolution 0.01 mg/L

Accuracy ±0.02 mg/L ±4% of reading @ 25°C

Typical EMC Deviation ±0.01 mg/L

Light Source Tungsten lamp

Light Detector Silicon Photocell with narrow band interference filter @ 575nm

Method Adaptation of EPA approved method. The reaction between copper and

the bicinchoninate reagent causes a purple tint in the sample.

Environment 0 to 50°C (32 to 122°F); max 95% RH non-condensing

Battery Type 1 x 9 volt

Auto-Shut off After 10' of non-use in

measurement mode

;

after 1 hour of non-use in

calibration mode

;

with last reading reminder.

Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7")

Weight 360 g (12.7 oz.).

REQUIRED REAGENTS

Code Description Quantity/test

HI 93702-0 Copper HR Reagent 1 packet

Precision is how closely repeated measurements

agree with each other. Precision is usually

expressed as standard deviation (SD).

Accuracy is defined as the nearness of a test

result to the true value.

Although good precision suggests good accuracy,

precise results can be inaccurate. The figure

explains these definitions.

In a laboratory using a standard solution of

2.00 mg/L cooper and a representative lot of

reagent, an operator obtained with a single

instrument a standard deviation of 0.06 mg/L.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

Hanna-instruments HI 96702 Manual de usuario Pagina 5