Hanna-instruments HI 83207-01 Manual de usuario descargar pdf (Pagina 24)

• Press Timer and the display will show the countdown prior to the measurement or, alternatively, wait

for 2 minutes and 30 seconds and press Read. When the timer ends the meter will perform the

reading.

• The instrument displays the results in mg/L of total chlorine.

Note: Free and total chlorine have to be measured separately with fresh unreacted samples following

the related procedure if both values are requested.

INTERFERENCES

Interference may be caused by: Bromine, Iodine, Ozone, Oxidized forms of Chromium and Manganese.

In case of water with hardness greater than 500 mg/L CaCO

, shake the sample for approximately

2 minutes after adding the powder reagent.

In case of water with alkalinity greater than 250 mg/L CaCO

or acidity greater than 150 mg/L CaCO

the color of the sample may develop only partially, or may rapidly fade. To resolve this, neutralize the

sample with diluted HCl or NaOH.

Total Chlorine

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Sin comentarios

Hanna-instruments HI 83207-01 Manual de usuario Pagina 24