Hanna-instruments HI 83207-01 Manual de usuario descargar pdf (Pagina 38)

Molybdenum

MOLYBDENUM

SPECIFICATIONS

Range 0.0 to 40.0 mg/L

Resolution 0.1 mg/L

Accuracy ±0.3 mg/L ±5% of reading at 25 °C

Typical EMC ±0.1 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 420 nm

Method Adaptation of the mercaptoacetic acid method. The reaction between molybdenum and

the reagents causes a yellow tint in the sample.

REQUIRED REAGENT

Code Description Quantity

HI 93730A-0 Reagent A 1 packet

HI 93730B-0 Reagent B 1 packet

HI 93730C-0 Reagent C 1 packet

REAGENT SETS

HI 93730-01 Reagents for 100 tests

HI 93730-03 Reagents for 300 tests

For other accessories see page 65.

MEASUREMENT PROCEDURE

• Select the

Molybdenum

method using the procedure

described in the

Method Selection

section (see page 12).

• Fill the cuvette with 10 mL of unreacted sample (up to

the mark) and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the Zero key. The display will show “-0.0-” when the meter is zeroed and ready for

measurement.

10 mL

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 67 68

Sin comentarios

Hanna-instruments HI 83207-01 Manual de usuario Pagina 38