Hanna-instruments HI 93414 Manual de usuario descargar pdf (Pagina 46)

• To set the baud rate, press CAL/CHECK when

set baud rate panel is displayed. The parameter

value and “CFM” tag will start blinking.

• Press the s or t keys to select the new baud

rate value.

• Press LOG/CFM to save the change. The new

selected baud rate will be displayed.

Alternatively, press CAL/CHECK to exit

without saving the changes.

LCD BACKLIGHT

The LCD can be illuminated to allow the user to see the readings even in

dark environments.

To turn ON/OFF the backlight, press LIGHT.

The backlight will automatically shut-off after 25 seconds of non-use to

save the battery life.

SET BAUD RATE

The HI 93414 has a RS232 and a USB link. When the USB connection is used, the RS232

connection becomes inactive.

To successfully communicate with the PC, the same baud rate must be selected on the instrument and

on the PC application. The available baud rates are 1200, 2400, 4800 and 9600.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Sin comentarios

Hanna-instruments HI 93414 Manual de usuario Pagina 46