Hanna-instruments HI 83214 Manual de usuario descargar pdf (Pagina 22)

Ammonia HR

AMMONIA HIGH RANGE

SPECIFICATIONS

Range 0 to 100 mg/L (as NH

-N)

Resolution 1 mg/L

Accuracy ±1 mg/L or ±5 % of reading @ 25 °C, whichever is greater

Light Source Tungsten lamp with narrow band interference filter @ 420 nm

Method Adaptation of the

ASTM Manual of Water and Environmental Technology, D1426-92

Nessler method. The reaction between ammonia and reagents causes a yellow tint in

the sample.

REQUIRED REAGENTS

Code Description Q.ty/test Q.ty/set

HI 93764B-0* Reagent Vial 1 vial 25 vials

HI 93764-0 Nessler Reagent 4 drops 1 bottle

Reagent Vial identification

: A HR, green label.

Note: Store the unused vials in their container in a cool and dark place.

REAGENT SET

HI 93764B-25 Reagents for 25 tests

For other accessories see page 68.

MEASUREMENT PROCEDURE

• Select

Ammonia HR

method following one of the procedures described in the “Method Selection” section

(see page 15).

• Remove the cap from a Reagent Vial.

• Add exactly 1.0 mL of sample to the vial, while keeping the

vial at a 45-degree angle.

• Replace the cap and mix by inverting the vial a couple of times. This is the blank.

• Place the vial into the holder and push it completely down.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Sin comentarios

Hanna-instruments HI 83214 Manual de usuario Pagina 22