Hanna-instruments HI 83214 Manual de usuario descargar pdf (Pagina 45)

COD MR

• Select the

Oxygen Demand, (COD) MR

method following one of the procedures described in the

“Method Selection” section (see page 15).

• Place the blank vial into the holder and push it completely down.

• Press the Zero key. The instrument will perform a zero sequence and after a few seconds the display

will show “-0.0-”. Now the meter is zeroed and ready for measurement.

• Remove the blank vial.

• Place the sample vial into the holder and push it completely down.

• Press Read.

The instrument will perform the reading.

• The instrument displays concentration in mg/L of oxygen demand on the LCD.

INTERFERENCES

Interference may be caused by:

Chloride (Cl

) above 2000 mg/L.

Samples with higher chloride concentration should be diluted.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

Sin comentarios

Hanna-instruments HI 83214 Manual de usuario Pagina 45